Technology has placed mobile devices at the forefront of work, leisure, entertainment, and other forms of content. Whether you are answering calls, downloading files, or doing other work matters, it is no longer surprising to carry a mobile device with you wherever you go.
The biggest roadblock, however, is having poor service or reception, which can deter you from using your data effectively. Nothing can be more frustrating than having to take an urgent call but not being able to due to the lack of service.
In the workplace, efficiency and speed are important to stay competitive. Many factors can affect employee performance and productivity, though one of the biggest headaches you can encounter is unreliable reception. Bad cell signals can take a significant toll on work and cause a backlog of calls or other essential tasks. Fortunately, there are ways to boost reception in the office. From going outside to installing a commercial cell phone booster, it is worth trying a few of these things.
Choose a Suitable Location for your Router
Maybe you have installed the wireless internet in your home for some time. She may have been in an isolated location, away from the devices that use her connection. Therefore, you need to analyze the best place in your home to put the router, which works with waves, such as radio or your mobile phone. Therefore, any obstacle in the middle of the road may interfere with your coverage.
The best strategy is to put the router in a high place, as the signal expands down and to the sides and it gets free of objects around. Since the signal spreads in all directions, it is best to place it in the center of the room. Another important point is to install it in the room of the house where you will most use it. Remember that cordless phones and microwaves can interfere with the signal. Therefore, it is best to keep the router away from these items.
Use WiFi Tools to Manage and Monitor your Speed and Other Factors
WiFi tools like WiFi Maestro can help you check the speed and quality of your Internet connection with their built-in speed test tools which enable you to do things like compare speeds between different wifi channels, and block unauthorized devices from connecting to your network. Many suggestions below can be resolved with WiFi Maestro, with troubleshooting such as latency testing, unauthorized usage, and configuration changes to your router like router settings, changing wifi channels, passwords, and much more.
Building materials are one of the many factors that can block cell signals, especially conductive materials like metal and aluminum. Thus, it is common to have poor reception while inside the office. If you have an important call to take, try stepping outside to reduce the blockage from the cell tower and get a better signal.
Move to Another Location
Reception is not always the same in all areas of a building, so try moving to another area to see if you will get a better connection. You can try going to the hallway or opening the window to gain better access to the cellular tower. Alternatively, you can also increase your elevation by moving to a higher floor or the roof if possible. Doing this can also help penetrate the barriers from the building and potentially give you better reception.
Find a Cellular Tower
Try to figure out where the nearest cellular tower is, and look for locations in the office that point to the direction of the tower. You may be able to get better reception in the areas that are near the tower, so try out different parts of the office and see if the service will improve in any way.
Install a Cell Phone Booster
If all the other ways do not work, or you urgently need reliable connection while inside the office, it may be high time to install a commercial cell phone booster. This device will help boost the signal for multiple mobile devices, so you no longer have to worry about bad service. The booster you get will depend on your office location, the structure of the building, and others. You have to make sure to select the right fit, or it might not be as effective as it can be. For example, directional antennas work well for places with single cellular towers, whereas omnidirectional antennas work better for areas with multiple carrier signals.
Poor reception can be a massive problem in the office, and one that can lead to adverse consequences if not addressed. Though some cases may be minor and can be solved by simply moving to another area, other cases are more challenging and will require you to install a booster. Now, more than ever, having a h3 signal is vital to prevent unnecessary stress and ensure you get your phone bills’ worth.
Keep your Devices Up to Date
There are currently four IEEE 802.11 standards for wireless networks: A, B, G and N. The A and G standards can transmit information up to 54 Mbps. Standard B transfers data with up to 11 Mbps of speed. The latest and fastest standard is the N format, which can transmit and receive data at up to 600 Mbps. To achieve the highest connection speeds you need to get an N-compatible router and a network card in your computer that supports this format. Outdated boards can be replaced easily and with a very affordable value. However, routers need to be replaced with newer models.
Protect your Network from Signal Thieves
Even if you already have a password registered on your Wifi Antennas for Long-Range Coverage, it may have been discovered and some opportunistic neighbor is using your connection, which will certainly slow you down. One of the best ways to protect yourself is to opt for a more advanced security standard, such as WPA. Just like any password, it needs to be difficult to access, always blending numbers and letters.
It is also advised that you change the sequence frequently and, to prevent others from identifying your network and trying to figure out the password, avoid using names that indicate where the signal is, such as “Wi-Fi.” There is yet another, more radical, measure to limit who has access to your router. This can be done by the MAC address of the network card. It works as follows: access to the equipment is completely blocked, except for the MAC code that has been released.
Change the Connection Channel
Many people have a wireless internet connection today, and their network is certainly working on the same channel as some of their neighbors. This is even more common if you live in a building. To improve the coverage of your Wi-Fi and to have less interference, you can do something very simple: choose the channel that is freer.
One of the most used software to verify the best channel for connection is WiFi Analyzer, for Android. There is also the WiFi Stumbler as an excellent alternative. Both offer graphs to see which channel each router is using, and then recommend the best ones. To change the channel router, you can contact the company providing the router or check the information in the instruction manual.
Install a Repeater to Increase Signal Range
It is possible that some of the above tips have not yet solved the signal range problem. If you live in a house with several floors and very thick walls, it is possible that the reach of Wi-Fi is greatly impaired. One way to solve this is by means of signal repeaters.As a first option, there are Wi-Fi repeaters that connect to the router through an Ethernet cable and resend the signal to more remote devices. These repeaters must always be connected by cable to the router, which can cause inconvenience. If this is a problem, there is another option: you can use the PLC devices, connected to the cabling of the power grid.
Watch Out for Apps that Hijack your Bandwidth
Online games, streaming video, downloading programs and other activities that require constant connection can greatly compromise the signal of your Wi-Fi network. If there are several people in your household who share the same network, it is possible that some device is consuming the most of the band, limiting the use of the network in other computers.
One of the ways to solve this problem is to use a tool that is present in almost all Wi-Fi routers, QoS. With it it is possible to prioritize data transfer by protocols, ie you can put video calls in front of the Torrent, for example. It is also possible to completely block some program that you think is consuming more data than another.
Restart your Router Frequently
Often, the router may hang because of the warming up. Therefore, restarting it manually is often strongly recommended. One of the suggestions is to keep it off during periods that no one usually accesses the internet – such as when you are sleeping, for example. This may improve signal transmission from your router as soon as you turn it back on, as well as ensuring longer life for your equipment.
Reinstall a New Firmware on the Router
This may be a slightly more complex alternative, but it may work. The firmware is compared to an operating system of the equipment, which controls all its functions. There is a setup that usually resolves many Wi-Fi signal hassles, which is increasing the power of the antennas. Unfortunately, few routers bring this option to the factory, as it may damage the machine. But if you have tried several alternatives and you did not succeed, why not try this option?
There are modified firmware that can change your old equipment and turn it into a central one with several features, among them the possibility to amplify the power of the antennas and other modifications. The best known are the DD-WRT and the Open WRT . Even if installing these systems is a bit tricky, at the end of the process you’ll notice it’s worth it. By following the above tips, you will have a better experience in your connections. It is important to note that some suggestions depend a lot on the model and brand of your router. The devices that connect to the Wi-Fi network also hold great importance in the quality of navigation. Therefore, it is always advised that your computer, tablet or smartphone is up to date and free of malware.
Originally posted 2020-05-03 20:49:10. Republished by Blog Post Promoter